Multimatic 200 Multiprocess Welder

MIG, Stick, and DC TIG welder. Lightweight and compact with an Impact-resistant case. Input power supply 120 or 230 volt. Welds up to 3/8” mild steel. Good for Light fabrication and Hobbyists.

Brand: Miller
Part numbers:Power Source : 907518
Welding processes:MIG, Flux-cored, Lift Arc DC TIG , DC Stick
Output range:With 120VAC: MIG/FCAW: 30 -140A, DC TIG: 5 -150A, DC Stick: 20 -100A, With 230VAC: MIG/FCAW: 30 - 200A, DC TIG 5 -150A, DC Stick 20 -150A
Input power:120/230 VAC, 1-phase, 50/60 Hz
Rated output:With120VAC: MIG/FCAW - 90A at 18.5V, 60% Duty Cycle, 110A at 19.5V, 20% Duty Cycle, DC TIG - 100A at 14V, 100% Duty Cycle, 150A t 16V, 30% Duty Cycle, DC Stick 70A at 22.8 V, 100% Duty Cycle, 100A at 24V, 35% Duty Cycle, With 230 VAC: MIG/FCAW -150A at 21.5V, 20% Duty Cycle, DC TIG: 100A at14V, 100% Duty Cycle, 150A at 16V, 30% Duty Cycle, DC Stick - 100A at 24V, 100% Duty Cycle, 150A at 26V, 30% Duty Cycle

Spec sheet

Multimatic 200 multiprocess welder:

After reviewing this product, would you like to:

    Copyright © 2024 | All rights reserved. Designed & Developed by Code & Co